How to use bitcoin from command line in Windows? - Bitcoin

QuarkCoin Cryptocurrency

Quark is a decentralized digital monetary system. It facilitates sending Quarks to Friends, Family Members Online Payments free of charges and charge-backs. Military Grade Encryption. No Bank or Government Control. Quark coins are based on the original idea of Bitcoin but improved, more secure, faster transaction times and zero fees. With improvements to design and security. There is also a greater coin supply with higher block rewards for miners. Quark is fully Open Source.
[link]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Understanding BIP149, redeployment of Segwit with BIP8

I recently published BIP149 and would like to take a few moments to explain the details of this proposal.
BIP149 is a completely new deployment of segwit, which I propose if the current BIP9/BIP141/143/147 segwit deployment fails to lockin/activate by November 15th.
BIP149 cannot be run on mainnet now, and there is code in the reference implementation to prevent it from running. It is incompatible with the current segwit deployment on purpose to remove unnecessary complications.
Essentially, the idea is, if the current segwit deployment fails to activate by Nov 15th, we can release new software that has BIP149. This uses BIP8 to activate segwit by July 2018. Miners will still be able to trigger activation by 95% threshold signalling as normal. In the 8 months from November to July 2018, nodes will be able to upgrade to BIP149. If segwit is not MASF activated by July 2018, there will be enough of the economy running BIP149 that nodes can begin enforcement. What will actually happen is on the first retarget after July 4th, the BIP8 state machine will switch to LOCKED_IN status for two weeks, and then on the following retarget, ACTIVATION will occur. The rationale here is in 5 months we achieved 70% saturation of witness capable nodes, so by the time segwit timesout with all the urgency and demand people feel for segwit, we can expect them to upgrade at least as fast, if not much faster. I have spoken with a number of developers who think this is a reasonable assumption.
Background, I had hoped to be able to release a BIP that can be deployed concurrently now with segwit, but, there are various technical complications in implementing it cleanly and making it easily reviewable. I had various feedback from others in previous iterations and in order to get the widest support from developers especially concerned with predictable results and thus safety, I came to the conclusion that the BIP will get the widest support by not attempting any shortcuts and by removing all complexity. I know many people want segwit now, but, I think we should just bite the bullet and do it the BIP149 way. I already made a shortcut BIP with BIP148. I will discuss the pros and cons at the end.
Back to BIP149, this is a completely new redeployment with a new service bit NODE_UAWITNESS and new compact block protocol version - doing this avoids many gotchyas which I will explain below:
Currently, segwit capable nodes advertize the NODE_WITNESS service bit and preferentially peer with other NODE_WITNESS nodes. Post activation, segwit-active nodes will then know who they should relay witness blocks to and who they should relay old style stripped blocks to. The assumption is if I am a NODE_WITNESS node and segwit has activated, then other NODE_WITNESS nodes will also be segwit activated. We cannot reuse NODE_WITNESS because when BIP149 activates, they would believe non-BIP149 NODE_WITNESS nodes were also active. Using a new service bit, and effectively starting a new deployment as if the previous deployment doesnt exist, is the most predictable and trouble free way to go about it.
Additionally, BIP149 is compatible with existing mining software by reusing the "segwit" name and deployment chainparams (it's not possible to have two deployments with the same name, one expired and one pending/active, due to how versionbits is implemented). In short, if the current segwit deployment fails to activate, we can reuse parts to maintain compatibility, while changing the bare minimum to remove any conflicts with old nodes. It's clean, predictable and easy to review.
BIP148 IS NOT BIP149
Remember BIP148 is exceptional, it's NOT what a usual UASF BIP should look like. A normal UASF if effectively activation on a predetermined date in the future (a flag day). BIP8 combines BIP9 miner signalling with a flagday if MASF does not occur.
How is BIP149 different to BIP148? So BIP148 is a UASF which can be used in two ways. (a) The economy can run BIP148 and basically force miners to signal for segwit, thus activating the current segwit deployment. Or, (b) a majority of miners, 60% or so, could run it and censor other miners who do not signal segwit, thus causing the current segwit to deploy. In method (a) a chain split will occur if any miners do not upgrade, and given the fact there are always absentee miners and pool operators, this is quite likely. It's the economy vs hash power saying "if you dont signal, your blocks will not be worth anything because we will reject them". In the case of (b) you have a majority of hashpower, who could use their majority to orphan any non signalling miners. This isn't great but it's less disruptive than (a) because there is a majority hashpower definitely opted in.
BIP149 on the other had does not guarantee a chain split since that could only happen if a miner deliberately takes action to manually create a segwit invalid block, which would be rejected by the economy. The incentives are different also, with BIP148 a chainsplit comes for free, regardless of if it lasts long or not. In BIP149, a miner would have to specifically take action to split and waste their money, which they could do at any time anyway. BIP149 is uncontroversial in the sense it is just a redeployment with guaranteed activation at the end, for a soft fork we are fairly sure people want and will upgrade to. The evidence is everywhere. UASFs deployed over a long time and a decent flagday are perfectly safe - all soft forks are enforced by nodes, even if activation is triggered by hashpower.
Anyway, we've got 8 months from now to review and think about BIP149 - it cannot be deployed until November. If you would like to show support for BIP149, feel free to add the following to your bitcoin.conf
uacomment=UASF-SegWit-BIP149 
Note you can have multiple uacomments like:
uacomment=BIP8 uacomment=UASF-SegWit-BIP149 uacomment=UASF-SegWit-BIP148 
You can find the bitcoin.conf file here
You can also just add this to a shortcut - create a shortcut (or edit the existing one you use) and add this to the end: -uacomment=UASF-SegWit-BIP149
e.g. (just add the property to the end like this):
"C:\Program Files\Bitcoin\bitcoin-qt.exe" -uacomment=UASF-SegWit-BIP149 if you are using Windows.
You can also just add uacomments as multiple command line/shortcut arguments like
-uacomment=BIP8 -uacomment=UASF-SegWit-BIP149 -uacomment=UASF-SegWit-BIP148 
Then you can check here to see how your node is signalling at https://bitnodes.21.co/ will show something like: xxx.xxx.xxx.xxx:8333 /Satoshi:0.14.1(UASF-SegWit-BIP149)/
If your node has synced and doesn't show using the link above make sure to enable forwarding of port 8333 so you accept incoming connections (if you want to that is) - in your client: go into settings / network and tick enable incoming connections and use upnp. You might have to add it to your firewall if this doesn't work. [taken from this user comment].
Read the BIP https://github.com/bitcoin/bips/blob/mastebip-0149.mediawiki
See the implementation https://github.com/bitcoin/bitcoin/compare/master...shaolinfry:uasegwit-flagday
submitted by shaolinfry to Bitcoin [link] [comments]

Gridcoin Leisure Update 3.7.14.0 Released

Today we have a new leisure update for you. This version includes a lot of "under the hood" changes, but there are some improvements for the average user as well.
 
Notably this release includes a better time to stake calculation method, thanks to @jamescowens. Also the Neural Network runs much smoother thanks to many optimizations by @ifoggz.
 
Download the update from GitHub here.
The Windows MSI can be downloaded here.
 
Full Release Notes:
Added
 
Changed
 
Fixed
 
Removed
 
Thank you to all the developers who contributed to this release. I will update this post when the Windows MSI has been uploaded to the website.
submitted by barton26 to gridcoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

What is up with all these Bitcoin devs who think that their job includes HARD-CODING CERTAIN VALUES THAT ARE SUPPOSED TO BE USER-CONFIGURABLE (eg: "seed servers")?

Recently, the developer of SegWit2x / BTC1, Jeff Garzik, caused some controversy by hard-coding the "seed servers" which Bitcoin uses to first start hunting for "peers".
Worse than that: apparently one of the "seeds" is a company he started, variously named Chainalysis / Skry / Bloq - which apparently specializes in de-anonymizing Bitcoin transactions and performing KYC/AML - and which also has apparently entered into agreements with Interpol.
Seriously, WTF???
This is what "Bitcoin devs" still consider to be part of their "job" - hard-coding parameters like this, which affect everyone else on the network - and which could easily be "exposed" to be made user-configurable - instead of being baked into the source code and requiring a friggin' recompile to change???
This recent event has refocused attention on the fact all these past years, most of these seed servers in "the" existing (legacy) client running on most of the network have _also been hard-coded - to domains under the control of "devs associated with Blockstream".
I don't like the list of seed servers in Bitcoin Core
Pieter Wuille - does not support BIP148 - works for Blockstream
Matt Corallo - does not support BIP148 - works for Blockstream
Luke Dashjr - supports BIP148 - works for Blockstream
Christian Decker - supports BIP148 - works for Blockstream
Jonas Schnelli - supports BIP148
Peter Todd - supports BIP148 - worked for Samson Mow who works for Blockstream
https://np.reddit.com/btc/comments/6nd50h/i_dont_like_the_list_of_seed_servers_in_bitcoin/
The corporate takeover of bitcoin illustrated in 1 commit
In The corporate takeover of bitcoin illustrated in 1 commit a user complains that btc1 changing the seed servers to servers run by some companies (see commit) equals a "corporate takeover of bitcoin". I never really took much care who runs these seed server, although they do posses a certain power over the network as correctly pointed out by P. Todd in the same thread:
...and the key thing with that is being able to control what nodes a node connects to can be a very powerful tool to attack new nodes, as it lets you prevent a node from learning about the valid chain with the most work.
[...]
4 out of 5 people running the bitcoin networks seed servers are directly associated with Blockstream!
I don't even believe that Blockstream is actually plotting an evil, forceful takeover of bitcoin using the seed servers. However it beautifully counteracts Adam's "decentralization is everything" arguments. What is most troublesome to me, is that this simple information is not allowed to appear on r\bitcoin at all.
https://np.reddit.com/btc/comments/6n8vqc/the_corporate_takeover_of_bitcoin_illustrated_in/
Seriously?
Bitcoin is almost 9 years old - and most people are still running clients which use hard-coded values (which require an inconvenient recompile to reconfigure) for the "seed servers"??
Maybe this is, in some sense, part of the reason why people like BlueMatt and Luke-Jr and Pieter Wiulle think they can lord it over us and tell everyone else what to do? ...because they have quietly (and unfairly / incompetently) hard-coded their own friggin' server domain names directly into everyone else's client code, as our "seed servers"?
Is the low level of "quality" we - as a community - have become accustomed to from our devs?
Do other clients (Bitcoin Classic, Bitcoin Unlimited and Bitcoin ABC) also gratuitously hard-code their "seed servers" like this?
Here's a post from a year ago regarding "seed servers" in Classic:
How come "classic" uses the same alert keys/DNS seeds as Core?
https://np.reddit.com/btc/comments/44atsp/how_come_classic_uses_the_same_alert_keysdns/
Meanwhile, here's the main question:
Why are any "serious" Bitcoin clients still "gratuitously" hard-coding any values like this?
Why has our "ecosystem" / "community" not naturally evolved to the point where we have some public "wiki" pages listing all the "good" (community-recognized, popular) seed servers - and every user configures their own client software by choosing who they want from this list?
(Maybe because we've been distracted by bullshit for these past few years, fighting with these very same devs because they've refused provide any support for users who want bigger blocks?)
What would users have to do if (God forbid) something were to happen to the servers of those 4-5 seed servers which are currently hard-coded into nearly everyone's clients?
In that situation (assuming some "new" seed servers quickly appeared) people would be have two options:
  • Edit their C++ source code and download/install a (trusted, verified) C++ compiler (if they don't already have one), and recompile the friggin' code; or
  • Wait until new binaries got posted online - and download them (and verify them).
Seriously?
This unnecessary "centralization point" (or major inconvenience / bottleneck) has been sitting in our code this entire time - while these supposedly knowledgeable devs keep beating us over their head with their mantra of "decentralization" - which they have actually been doing so little to maximize?
Psycho-Socio-Economic Side Bar
Serious (but delicate/senstive) question: How many of these "devs" have developed (possibly unconscious?) behaviors in life where they try to make users dependent on them?
"Vendor lock-in" is a thing - a very bad thing, which certain Bitcoin devs have exhibited a tendency to inflict on users - in many cases due to rather obvious (psychological, social, and/or economic) reasons.
We should gently (but firmly) reject these tendencies whenever any dev exhibits them.
Our community should expect and demand an accessible, user-friendly interface for all user-configurable parameters - to maximize decentralization and autonomy
  • In "command-line" versions of the client program, these kind of parameters should be:
    • in a separate config file - using some ultra-simple, standard format such as YAML or JSON
    • also configurable via options (eg, --seed-server) upon invocation on the command-line
  • In GUI versions version of the client program (using some popular cross-platform standard such as Qt, HTML, etc.) these kind of parameters should be exposed as user-configurable options.
Yes, these user-configurable values for things like "seed servers" (or "max blocksize") could come pre-configured to "sensible defaults - so that the software will work "out of the box" (immediately upon downloading and installing) - with no initial configuration required by the user.
Yes: Even the blocksize has always been user-configurable - but most users don't know this, because most devs have been hiding this fact from us.
Three recent posts by u/ForkiusMaximus explained how Adjustable-Blocksize-Cap (ABC) Bitcoin clients shatter this illusion:
Adjustable-blocksize-cap (ABC) clients give miners exactly zero additional power. BU, Classic, and other ABC clients are really just an argument in code form, shattering the illusion that devs are part of the governance structure.
https://np.reddit.com/btc/comments/614su9/adjustableblocksizecap_abc_clients_give_miners/
Adjustable blocksize cap (ABC) is dangerous? The blocksize cap has always been user-adjustable. Core just has a really shitty inferface for it.
https://np.reddit.com/btc/comments/617gf9/adjustable_blocksize_cap_abc_is_dangerous_the/
Clearing up Some Widespread Confusions about BU
https://np.reddit.com/btc/comments/602vsy/clearing_up_some_widespread_confusions_about_bu/
Note about Bitcoin ABC vs Bitcoin Unlimited:
There is a specific new Bitcoin client called Bitcoin ABC, which functions similar to Bitcoin Unlimited - with the important difference that Bitcoin ABC is _guaranteed to hard-fork to bigger blocks on August 1_.
(Please correct me if I'm wrong about this. Documentation for the behavior of these various hard-forks is currently still rather disorganized :-)
All serious devs should be expected to provide code which does not require a "recompile" to change these "initial, sensible" default parameters.
I mean - come on. Even back in the 80s people had "*.INI" files on DOS and Windows.
Nearly all users understand and know how to set user-configurable values - for decades.
How many people are familiar with using a program which has a "Preferences" screen? (Sometimes you may have to close and re-open the program in order for your new preferences to take effect.) This is really basic, basic functionality which nearly all software provides via a GUI (and or config file and/or command-line options).
And nearly all devs have been offering this kind of functionality - in either command-line parameters, config files, and/or graphic user interfaces (GUIs).
Except most Bitcoin devs.
The state of "software development" for Bitcoin clients seems really messed up in certain ways like this.
As users, we need to start demanding simple, standard features in our client software - such as accessible, user-friendly configurability of parameter values - without the massive inconvenience of a recompile.
What is a "Bitcoin client"?
After nearly 9 years in operation, our community should by now have a basic concept or definition of what a "Bitcoin client" is / does - probably something along the lines of:

A Bitcoin client is a device for reading (and optionally appending to) the immutable Bitcoin Blockchain.

Based on that general concept / definition, a program which does all of the above and also gratuitously "hard-codes" a bunch of domain names for "seed servers" is not quite the same thing as a "a Bitcoin client".
Such an "overspecialized" client actually provides merely a subset of the full functionality of a true "Bitcoin client", eg:
  • An "overspecialized" client only enables connecting to certain "seed servers" upon startup (in accordance with the "gratuitous opinion" of the dev who (mis)translated the community's conceptual specifications to C++ code)
  • An "overspecialized" client only enables mining blocks less that a certain size (in accordance with the "gratuitous opinion" of the dev who (mis)translated the community's conceptual specifications to C++ code)
One of the main problems with nearly all Bitcoin clients developed so far is that they are gratuitously opinionated: they "gratuitously" hard-code particular values (eg, "max blocksize", "seed servers") which are not part of the whitepaper, and not part of the generally accepted definition of a "Bitcoin client".
This failure on the part of devs to provide Bitcoin clients which behave in accordance with the community's specification of "Bitcoin clients" is seriously damaging Bitcoin - and needs to be fixed as soon as possible.
Right now is a good opportunity - with so many new Bitcoin clients popping up, as the community prepares to fork.
All devs working on various Bitcoin client software offerings need to wake up and realize that there is about to be a major battle to find out which Bitcoin client software offering performs "best" (in the user-interface sense - and ultimately in the economic sense) at:

reading (and optionally appending to) the immutable Bitcoin Blockchain

The Bitcoin client software offerings which can optimally (and most simply and securely :-) "satisfy" the above specification (and not merely some gratuitously overspecialized "subset" of it) will have the most success.
submitted by ydtm to btc [link] [comments]

Homelab collective ressources post!

Hey guys!
I'm fairly new to this sub and to having a home lab in general and I found this community to be so kind and helping, I wanted to give back what I've learned. I'm seeing a lot of questions asked around on improvements and on what to do with x extra hardware so I thought it would be nice to have a thread to regroup that.
 
I'll put here some stuff I gathered and the most common questions I've seen, feel free to contribute and i'll update the post along.
 
Latest Additions
 
Homelab Dashboard
Posts about dashboards have been growing lately and here are some of the best that were kind enough to provide us with their sources.
User Screenshot Source
yours truly http://imgur.com/a/GhCNH https://github.com/Gabisonfire/dashboard-q
lastditchefrt http://i.imgur.com/5zQdao4.png https://github.com/d4rk22/Network-Status-Page
_SleepingBag_ http://i.imgur.com/Ql9ZM4W.png https://github.com/jsank/homelabdash
NiknakSi https://niknak.org/extras/sysinfo TBA
DainBramaged http://imgur.com/jYNlUEQ https://github.com/gordonturneBigBoard
michaelh4u https://i.imgur.com/XkZwMKj.png https://github.com/michaelh4u/homelabfrontpage
spigotx http://imgur.com/a/1zMht https://github.com/spigotx/HomeLab2
SirMaster https://nicko88.com/ https://github.com/dashbad/plex-server-status
yourofl10 http://imgur.com/a/AyROa TBA
TheBobWiley http://imgur.com/a/oU6d3 https://github.com/TheBobWiley/ManageThis-LandingPages
0110010001100010 http://i.imgur.com/iwtQcsL.jpg https://github.com/danodemano/monitoring-scripts
mescon & SyNiK4L https://i.imgur.com/gqdVM6p.jpg https://github.com/mescon/Muximux
ak_rex http://i.imgur.com/a/RJkrT https://github.com/ak-rex/homelab-dashboard
 
Or build yours from scratch: PRTG API, ELK, Grafana, freeboard, JumpSquares
 
Some other resources: Custom Monitoring Scripts by 0110010001100010
 
Credits to apt64 for his original post
= Pi specific =
 
= Download Automation =
 
= Virtualization =
 
= Monitoring =
 
= Media Center =
 
= Remote access =
 
= VOIP =
 
= Networking =
 
= File Servers/Storage/RAID =
 
= Cameras =
 
= Documentation =
 
= Dynamic DNS =
 
= Backup =
 
= Creating network diagrams =
 
= Guides =
 
= Misc =
 
That's all I could come up with on top of my head + some research, passing over to you guys so we can get a nice complete list!
 
Let's try and stick with free(or mostly) softwares, let me know if you guys feel otherwise.
submitted by Gabisonfire to homelab [link] [comments]

Run a 0.14 Full-Node on RaspberryPi3 Pruned(less than 16GB SD needed)

Hi!
Happy if this guide helps you.
Tip if you want: 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
UPDATE 04/06/17
Add 'uacomment=UASF-SegWit-BIP148' into your bitcoin.conf if you want to signal UASF.
UPDATE 03/13/17
ADDED a tl;dr; Version at the end of this Post.
UPDATE 03/12/17:
Just to test it - I reinstalled all on 8GB SD and it works as well. But maybe you should use at least 16GB for the beginning.
Using a 128GB card for the first version was a little bit stupid - so I reinstalled everything on a 8GB SD card. Including Linux and a pruned blockchain - and it works.
I used prune=550 and Jessie Lite (headless / command line) - without wallet and gui.
The SD is almost full, but it works so far
I also updated the whole manual a bit to make things more clear. Thank you for all your feedback!
Just started my Bitcoin Node today and wanted to share the way I did it with people who are interested in running their own full node. It took some time to write everything down - hopefully correct so far.
I am sure, many people around bitcoin are way more informed and educated as I am - I am the noob. So I wrote this manual to help users like me - noobs, to get started with a cheap, simple bitcoin node on raspberry pi.
Have fun!
I wanted to get my Raspberry Pi 3 working as a node to support the network. Actually the process of installing and running the node was more or less easy - but for Noobs (like I am) it might be a bit tricky to start the whole thing, because there are different ways.
Did you - like me - think you would need +120GB on the raspi, external USB HDD to be a full node? You won't!
If you have a Raspberry and you know what Bitcoin is, I guess, you are a little bit aware of linux, networks and of course bitcoin - so I won't go into detail too much.
This guide is just a little helper to get a full node running on your raspberry pi. Thanks to the help of the nice people in this sub and of course the documentation by the developers, I got it working - and of course also special thanks to raspnode.com - as I followed their tutorial to start - I went some other ways here and there - so please read carefully.
For the Part 2 I would suggest to have http://raspnode.com/diyBitcoin.html open and read through my manual.
I split the tutorial in 2 Parts - PART ONE is about installing the client on your PC and downloading the Blockchain.
PART TWO is about the setup of the raspberryPi and transferring the pruned blockchain to the pi and run it as a full node!
The first thing to be aware of is: You actually need to download the whole blockchain to get this working - if you already have your bitcoin client synced on the PC / MAC great you can reuse it!
Now you might think "but you said less than 16GB in the title!"
Yes, but the good thing is you won't need to download it on your Raspberry, neither you need to sync it completely on your raspberry which took ages (weeks!) before. When you finished this Guide, you will just have a max. 4GB Blockchain on your Raspberry Pi - but it still is a full node! The magic word is Pruning.
Maybe even a 8GB SD Card works just fine including Linux (jessie lite)!
So, if you already have a full node on your PC - Great you can almost skip PART ONE - BUT have at how to Prune in PART ONE if you don't know about it.
For PART TWO you'll need a Raspberry Pi 2 or 3 (I used 3) min. 8GB (works also) or better 16GB SD Card. (I used a 128GB for the first version of this manual - which is way too big)

PART ONE

This is the manual how to get started on you PC / MAC / Linux (I did it on Win7)
Go to: https://bitcoin.org/en/download and download the core Client for your Machine (I used win64).
Install it and configure it to save the Blockchaindata to the directory of your choice - so instead getting 120GB on your C drive, I would suggest to download it to another place like a USB drive.
You can set this up during the install. Standard folder for the blockchain folder is "%APPDATA%\Bitcoin" on Windows.
or you can do it after the install by creating a bitcoin.conf file inside your installation folder / or %APPDATA%\Bitcoin and add
datadir=l:\yourfolder
to the file. Line by line.
By the way here you could also just add dbcache - to use more memory to speed up the process a bit:
dbcache=4096
if you don't want to use the settings inside the program. (you can also set this inside the program under settings! If you have this inside the bitcoin.conf you will see the amount you set there from inside the program - it overrides the values)
You can check inside the windows client under settings, if you can see a manual dbcache is set by having a look at the left footer area. When your dbcache value shows up, everything is fine.
So the Blockchain download process will take time - maybe a few days! Depending on your machine, internet connection and HDD.
The Blockchain is huge as it contains every single transaction of the past until today. You won't need to keep your PC running all the time, you can turn it off and on and it will resync automatically when you start bitcoin-qt.exe!
Make sure to close the client always via "quit" - ctrl+q.
After you have your bitcoin core installed, the blockchain downloaded and synced - you are ready to PRUNE!
First - close the Client and let it close smoothly. After it is really closed you can follow these steps:
By pruning, your blockchain will dramatically shrink. From 120GB to just a few GB.
Be aware, that you will lose your Downloaded Blockchain as pruning will erase a big chunk of it! If you have enough space, you could of course keep the full blockchain saved somewhere on another HDD.
You can prune by editing your bitcoin.conf file by adding:
prune=550
I used prune=1024 - not sure where the differences are right now (min. prune=550). (for my 8GB version I used 550! I suggest to use this.)
Save the bitcoind.conf file and restart your windows client.
It will now clean up the Blockchain. So just the latest blocks are saved. The client should start without any problems. Maybe it takes some time to prune the blockchain data.
Check if everything works normally (the client opens as usual, you can see an empty wallet) than close the client.
Inside the Bitcoin Folder, you'll find two folders called:
blocks chainstate
those are the interesting folders containing the important data (now pruned) - and we will transfer those two to the raspberry later!
Now you are good to start the raspi transfer explained in the next part.

PART 2

Here is what I did:
1) I installed Raspian Pixel (https://www.raspberrypi.org/downloads/raspbian/) using a 128 GB SD - which is not needed because of "Pruning" - I think a 16GB card might work, too! (You can also install Raspian Jessie Lite - which saves you even more space, as it runs headless - only command line) (Updated: It is better to use Jessie Lite to save a lot of space - when you are fine with only command line)
2) I followed partly this tutorial to get everything running and setup:
http://raspnode.com/diyBitcoin.html
Please have a look at it - I have copied the Headlines in capitals to let you know what I did, and what I skipped.
On Tutorial Page: Start with RASPBIAN (OPTIONAL) CONFIG OPTIONS.
Set You RasPi up including "EDITING FILES" to save your Layout at the tutorial page and come back here.
I skipped the CONFIGURE USB AND SET AUTOMOUNT process, as we are going to use PRUNING to reduce the 120GB to a tiny filesize - so USB Devices are not needed here!
It was necessary to ENLARGE SWAP FILE to install bitcoin core - otherwise it didn't went through which ended in a frozen raspi.
So have a close look by following the raspnode tutorial at: ENLARGE SWAP FILE.
I have my raspi running via cable to router - but you can also WiFi setup everything described under NETWORKING ON THE RASPBERRY PI.
Now comes the interesting part: Follow the steps at DOWNLOADING BITCOIN CORE DEPENDENCIES - they work fine for 0.14.0 too. Git should be on Board already when you installed Pixel - otherwise you would need to install it.
sudo apt-get install git -y (only jessy lite)
I skipped the next command lines - as I don't use bitcoin-qt wallet. If you want to use it as wallet - do the step.
mkdir ~/bin cd ~bin
Now you are in the folder you want your bitcoin core data be downloaded to via git. I didn't Downloaded the Berkeley Database source code - so I also skipped the whole next command lines
[email protected]~/bin$ wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz [email protected]~/bin$ tar -xzvf db-4.8.30.NC.tar.gz [email protected]~/bin$ cd db-4.8.30.NC/build_unix/ [email protected]~/bin/db-4.8.30.NC/build_unix$ ../dist/configure --enable-cxx [email protected]~/bin/db-4.8.30.NC/build_unix$ make -j4
and went on with "INSTALLING BITCOIN"!
I followed the first part but instead downloading 0.13 I took of course the latest version:0.14
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git cd bitcoin ./autogen.sh
this might take some time to start.
If you have trouble with hanging RESOLVING DELTAS - just restart the Raspberry Pi and remove the bitcoin folder inside /~bin using
rm -rf bitcoin
this command will delete the folder and you can reuse
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git

For some reason RESOLVING DELTAS is a common problem with different downloads - so just retry it and at least after 3 times it should work!

as I didn't use the GUI/ Wallet, I ran
./configure --enable-upnp-default --disable-wallet
as I don't need the wallet functionality.
I didn't need to use "MAKE" which saves you maybe up to 2.5 hours.
instead you can just go ahead with:
sudo make install
(If I am wrong in doing so - please let me know)
The install takes some time - and just a heads up: when it gets stuck somewhere - just redo the installation process - it took three times to went through - stuck at some processing.
After the installation took place you can finally get your Raspberry Pi Node running in no time!
To test if the the installation went through - you can just start bitcoind using:
bitcoind &
than check if everything is working so far:
bitcoin-cli getinfo
after a few seconds you should see version: etc...
if not, something went wrong. Try to redo the steps in the raspnode tutorial.
(don't give up if it failed - retry! Ask your questions here)
IMPORTANT: you need to stop bitcoin on your raspberry now!
bitcoin-cli stop
If you don't need an external USB Drive - what I hope - as we are going to use pruning just go ahead and skip the USB part and create a file inside (or follow the raspnode tutorial on how to setup the USB drive):
cd .bitcoin
sudo nano bitcoin.conf
and enter the exact same pruning size you have used on your Desktop Machine to prune. I used 1024 but the minimum is 550. (used 550 for the 8GB SD card on PC and Raspberry)
prune=550
That's it for the raspi.
update: To signal UASF enter in a new line:
uacomment=UASF-SegWit-BIP148

TRANSFER

Now you have to transfer the two folders CHAINSTATE and BLOCKS from your PC bitcoind directory to your raspberry.
I am using a program called "WINSCP" - it is free and easy to use: https://winscp.net/eng/download.php
We need this to transfer the files to the Raspberry pi. Pretty sure you can also do it via SSH - but I am the noob. So let's keep it simple.
Open Winscp and put in the IP Address of your Raspberry Pi, User and Password (same as in SSH)
You should now see the directories on your Raspberry Pi. There is a folder called
.bitcoin
enter it and you will see the two folders
blocks & chainstate
you can delete them on the raspberry as they have some data from your previous test inside.
Make sure you can also see the bitcoin.conf file in that directory, which needs to contain the exact same prune line, like the one on your desktop machine. If not, make sure to edit it via SSH. The line "datadir=l:\yourfolder" is obviously not needed in the Raspberry bitcoin.conf file.
Now grab the two folders CHAINSTATE and BLOCKS from your PC and copy them to your .bitcoind folder.
I also copied banlist.dat, fee_estimation.dat, mempool.dat and peers.dat to the folder - not really knowing if needed! Not needed.
The whole copy process might take some minutes (against some weeks in the old way).
After copying is finished, you can now start bitcoind on the Raspberry.
bitcoind &
the & symbol let you still use the command line while the process is running btw.
The process - if succesfull - will take some time to finish.
bitcoin-cli getinfo
Will give you some informations what is going on right now. When you can see, that it is checking the blocks, this is good!
If you get an error - double check - if you have the correct prune size (same as on desktop machine) - in bitcoin.conf and that this file is inside .bitcoin on RaspberryPi. It took me some time, to find my mistakes.
Congrats! You are almost a part of the network!
To make your node now a fullnode, you will need to go to your router (often 192.168.1.1) and enable portforwarding for your raspberry pi - and open ports 8333 - that's it!
You can now go to: https://bitnodes.21.co/nodes/
scroll down to "JOIN THE NETWORK" and check check if your node IP is connected!
It will show up as soon as the blocks are checked and the raspi is running.
Well done!
Now you are running a full node, with a small Blockchain and got it working in Minutes, not weeks!
I really hope, my little tutorial worked for you and your are part of the Node network now.
If you have problems or I made a mistake in this helper tut, just let me know and I will try to make it better.
Have fun and NODL!
the noob
tl;dr; (if you are a real noob start with the non-tl;dr version!)
tl;dr; PART ONE
1) Download & install / setup bitcoincore @ https://bitcoin.org/de/download
2) change dbcache to something smaller than your memory and download the whole Blockchain (120GB).
3) create a file called bitcoin.conf put the line prune=550 (or higher) in to activate pruning on win inside %appData%/bitcoin
4) Open ports 8333 on your Router to make this a full node with a smaller Blockchain.
You are running a full node on your PC.
tl;dr; PART TWO
1) Install jessie lite and the needed dependencies on your SDCard - Raspberry
( >git clone -b 0.14 https://github.com/bitcoin/bitcoin.git )
  • see tutorial for more info.
2) create a file called bitcoin.conf inside .bitcoin and add the same prune=Number you had on your PC.
3) transfer the pruned folders BLOCKS and CHAINSTATE to the Raspberry Folder .bitcoin
4)Start "bitcoind &"
5) let everything sync
6) Make sure you have port 8333 opened on your router.
You are running a full node on your Raspberry with a super small Blockchain (I put all on a 8GB SDcard)
Tip if you want : 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
updated 03/12 - will update more, soon.
updated 03/12.2 - I updated the whole process a bit and also added some improvements.
updated 03/14/ Added a tl;dr version at the end.
submitted by I-am-the-noob to Bitcoin [link] [comments]

such beginner shibe thread wow how to get coin

 how to shibecoin v rich in minutes much instruct so simple any doge can do 

START HERE

UPDATE 1/21/14: I'm not updating this guide anymore. Most of the steps should still work though. See the wiki or check the sidebar for updated instructions.
Before you do anything else, you need to get a wallet. Until there's a secure online wallet, this means you need to download the dogecoin client.
Now open the client you just downloaded. You'll be given a default address automatically, and it should connect to peers and start downloading the dogechain (aka blockchain in formal speak). You'll know because there will be a progress bar at the bottom and at the lower right there should be a signal strength icon (TODO: add screenshots).
If you've waited 2 or 3 minutes and nothing is happening, copy this:
maxconnections=100 addnode=95.85.29.144 addnode=162.243.113.110 addnode=146.185.181.114 addnode=188.165.19.28 addnode=166.78.155.36 addnode=doge.scryptpools.com addnode=doge.netcodepool.org addnode=doge.pool.webxass.de addnode=doge.cryptopool.it addnode=pool.testserverino.de addnode=doge.luckyminers.com addnode=doge.cryptovalley.com addnode=miner.coinedup.comdoge addnode=doge.cryptoculture.net addnode=dogepool.pw addnode=doge.gentoomen.org addnode=doge.cryptominer.net addnode=67.205.20.10 addnode=162.243.113.110 addnode=78.46.57.132 
And paste it into a new text file called dogecoin.conf, which you then place into the dogecoin app directory.
Now restart your qt client and the blockchain should start downloading in about 1-2 minutes.
Once it finished downloading, you're ready to send and receive Dogecoins!

GETTING COINS

Decide how you want to get Dogecoin. Your options are:
I'll go into detail about each of these. I'm currently writing this out. I'll make edits as I add sections. Suggestions are welcome.

MINING

Mining is how new dogecoins are created. If you're new to crypto currencies, read this. To mine (also called "digging"), a computer with a decent GPU (graphics card) is recommended. You can also mine with your CPU, but it's not as efficient.

GPU MINING

These instructions cover only Windows for now. To mine, you'll need to figure out what GPU you have. It'll be either AMD/ATI or Nvidia. The setup for both is approximately the same.

Step One: Choose a pool

There's a list of pools on the wiki. For now it doesn't really matter which one you choose. You can easily switch later.
NOTE: You can mine in two ways. Solo mining is where you mine by yourself. When you find a block you get all the reward. Pool mining is when you team up with other miners to work on the same block together. This makes it more likely that you'll find a block, but you won't get all of it, you'll have to split it up with others according to your share of the work. Pool mining is recommended because it gives you frequent payouts, because you find more blocks. The larger the pool you join, the more frequent the payouts, but the smaller the reward you get.
Over a long period of time the difference between pool and solo mining goes away, but if you solo mine it might be months before you get any coins.

Step two: Set up pool account

The pool you chose should have a getting started page. Read it and follow the instructions. Instructions vary but the general idea is:
When you're done with this, you'll need to know:

Step three: Download mining software

For best performance you'll need the right mining software.
Unzip the download anywhere you want.

Step four: Set up miner

Create a text file in the same folder as your miner application. Inside, put the command you'll be running (remove brackets).
For AMD it's cgminer.exe --scrypt -o stratum+tcp://: -u -p
For Nvidia it's cudaminer.exe -o stratum+tcp://: -O :
Substitute the right stuff in for the placeholders. Then on the next line of the text file type pause. This will let you see any errors that you get. Then save the file with any name you want, as long as the file extension is .bat. For example mine_serverName.bat.

Step five: Launch your miner

Just open the .bat file and a command line window should pop up, letting you know that the miner is starting. Once it starts, it should print out your hash rate.
If you now go to the pool website, the dashboard should start showing your hashrate. At first it'll be lower than what it says in the miner, but that's because the dashboard is taking a 5 minute average. It'll catch up soon enough.
NOTE: A normal hashrate is between 50 Kh/s up to even 1 Mh/s depending on your GPU.

You're now mining Dogecoins

That's it, nothing more to it.

CPU MINING

CPU mining isn't really recommended, because you'll be spending a lot on more on power than you'd make from mining Dogecoin. You could better spend that money on buying Dogecoin by trading. But if you have free electricity and want to try it out, check out this informative forum post.

Trading

Trading has been difficult so far, but Dogecoin just got added to a few new exchanges. If you don't have a giant mining rig, this is probably the best way to get 100k or more dogecoins at the moment. I'll write up a more complete guide, but for now check out these sites:

Faucets

Faucets are sites that give out free coins. Usually a site will give out somewhere between 1 and 100 Dogecoin. Every site has its own time limits, but usually you can only receive coins once every few hours, or in some cases, days. It's a great way to get started. All you do is copy your address from the receive section of your wallet and enter it on some faucet sites. Check out /dogecoinfaucets for more. If you go to each site on there you might end up with a couple hundred Dogecoin!

Begging

This method is pretty straightforward. Post your receiving address, and ask for some coins. Such poor shibe. The only catch is, don't do it here! Please go to /dogecoinbeg.

Tips

At the moment there are two tip bots:
Other redditors can give you Dogecoin by summoning the tip bot, something like this:
+dogetipbot 5 doge
This might happen if you make a good post, or someone just wants to give out some coins. Once you receive a tip you have to accept it in a few days or else it'll get returned. Do this by following the instructions on the message you receive in your inbox. You reply to the bot with "+accept". Commands go in the message body. Once you do that, the bot will create a tipping address for you, and you can use the links in the message you receive to see your info, withdraw coins to your dogecoin-qt wallet, see your history, and a bunch of other stuff.
As a bonus, so_doge_tip has a feature where you can get some Dogecoins to start with in exchange for how much karma you have. To do this, send the message "+redeem DOGE" to so_doge_tip. You'll need to create a tipping account if you don't have one.
If you want to create a tipping account without ever being tipped first, message either of the bots with "+register" and an address will be created for you.

CHANGELOG

  • 1/21/14 - Added note about this thread no longer being updated
  • 1/21/14 - Changed wallet links to official site
  • 12/27/13 - Added 1.3 wallet-qt links
  • 12/21/13 - Added new windows 1.2 wallet link
  • 12/20/13 - Fixed +redeem text
  • 12/18/13 - Added short blurb on trading.
  • 12/18/13 - Updated cudaminer to new version (cudaminer-2013-12-18.zip).
  • 12/18/13 - Fixed +redeem link
  • 12/18/13 - Updates dogecoin.conf, from here.
  • 12/17/13 - Linked to mining explanation.
  • 12/17/13 - Added link to CPU mining tutorial, in response to this.
  • 12/16/13 - Added links to tip commands, link to dogetipbot wiki.
  • 12/16/13 - Note about tip commands going in body, in response to this.
  • 12/16/13 - Added link to cgminer mirror, thanks to scubasteve812 and thanks to Bagrisham.
  • 12/16/13 - Note about removing brackets in response to this.
  • 12/15/13 - Fixed hash rate as per this comment, thanks lleti
  • 12/15/13 - Added info for all other ways of getting money, except for trading (placeholder for now)
  • 12/15/13 - Added windows GPU mining instructions 12/15/13 - Added wallet instructions, list of how to get money
submitted by lego-banana to dogecoin [link] [comments]

Using Brackets From the Command Line in Windows How To Backup and Restore Your DogeCoin Wallet Safely and Securely (Or any QT Client) Bypass Admin Block on CMD(command prompt) How to configure cgminer - Windows mining tutorial How to Open the Command Line in Windows 7

QT wallet – Most of the crypto currency core wallets are developed using QT software framework. They are available for Windows, Linux and Mac. QT wallets are professional client and offers full function that’s available for a currency. Also they are heavy as it is known to download the complete blockchain to your local computer. Windows 7 & 8: Press Win-R (Windows key plus the R key) to open the Run dialog. Type cmd to open the console. Type ipconfig /all and find the result that best matches your connection—usually a wireless connection. Look for a line that starts with “Physical Address” and contains a value like this: Bitcoind – a daemon program that implements the Bitcoin protocol, is controlled through the command line. It is one of the main components of the Bitcoin network node software. Bitcoin software exists in two forms: a GUI application and a background application (daemon on Unix, service on Windows). The simplest way to start from scratch with the command line client, automatically syncing blockchain and creating a wallet, is to just run this command (without arguments) from the directory containing your bitcoind binary: ./bitcoind To run with the standard GUI interface: ./bitcoin-qt Command-line arguments "C:\Program Files (x86)\Bitcoin\bitcoin-qt.exe" -datadir=d:\BitcoinData Start Bitcoin, now you will see all the files are created in the new data directory. Linux. By default Bitcoin will put its data here: ~/.bitcoin/ You need to do a "ls -a" to see directories that start with a dot. If that's not it, you can do a search like this:

[index] [24452] [23719] [14331] [848] [16596] [26557] [30481] [1207] [22175] [27143]

Using Brackets From the Command Line in Windows

Cgminer is bitcoin mining software that's easy to setup.This mining tutorial will demonstrate how to configure cgminer on windows. #cgminer #cgminertutorial #mining #cryptomining. This video shows how to open the Command Prompt in Windows 7, and how to use the directory (dir) command. It shows how to type /? for help on command syntax and how to output to a file. 15 Command Prompt Secrets and Tricks in Windows - Duration: 12:46. ThioJoe 796,514 views. 12:46. How to Remotely Shutdown any Computer with CMD New 2018 - Duration: 7:25. 18 CMD Tips, Tricks and Hacks CMD Tutorial for Beginners Command Prompt Windows 7/8/8.1/10 ... BITS OF TUTORIALS 856,799 views. 14:10. Sharing and Mapping in the Command Prompt - Duration: 7 ... Bitcoin from the Command Line ... How to hide secret monero miner at the backround and autostart in Windows - Duration: 10:49. CryptoEVO 29,421 views. 10:49.

Flag Counter